Hinckley Radio Control Car Club

I'm after more help!

After seeing the Brushless mardaves go around at the Mardave GP I have built one!

I'm just putting the motor and speed controller in and looking at all the settings, does anyone have a list of setting that would be a good starting point??

Any other help advice on using the Brushless system would be much appreciated.

Cheers

hi mate
Battery cut off = off
Max speed around = 90-100%
Max torque = around 50-60%
Max brake start off with 50% and work from there
Drag brake around 50% again
Max punch around 55%
Start power around 70-80%
Try that then work from there