Mardave Classification
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: Mardave Classification
Hi yes i think the mardave motor is quicker i think dont hold me to it
Richie which car do you mean the black and blue car i was running last saturday?
ps forget what i said about the 10.5 system
And yes we need to now keep away the mardave system and the 13.5 guy's
Richie which car do you mean the black and blue car i was running last saturday?
ps forget what i said about the 10.5 system
And yes we need to now keep away the mardave system and the 13.5 guy's
Re: Mardave Classification
Here we go again.......................!!!
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: Mardave Classification
Go again what we are going for three classes because the running the two brushless group's together = unfair advantage to the mardave system!
- Wacker1
- Expert Member
- Posts: 416
- Joined: Fri Feb 15, 2008 3:28 pm
- Name: Dean Gibbs(Wacker1)
- Car: Yoke BD8 17. YZ-2CA
- Location: Hinckley
Re: Mardave Classification
I agree with Richie.........that there should only be 2 Classes for Mardaves.
The STANDARD CLASS with the 'Brushed' G1/G2 Motor has been going for a long time & has worked fine as it is, so this should really stay as it is. This should be left as the Beginners/Entry Level Class, which is very cheap to do, but still being very Competitive. The Standard Mardave G1/G2 Motor may be a 25T, but its still proven to be quite abit slower than a 27T Rebuildable Stock Motor, so it would be unfair if the 27T Stock was allowed Points in the Standard Class Championship.
When many of the regular more experienced Mardave Racers heard talk of a possible NEW 2nd CLASS for Mardaves, allowing the Commercially available options of a Diff, Carbon Fibre Chassis & Mardave Brushless System, I think that many(including myself) were really keen on the idea, as it would step up their Cars Performance alittle & increase their Skill level more, without having the expence of the higher end Touring Car & 12th Pan Car Classes.
Since then, I think that most of us have come to realise that the Mardave Brushless System is'nt what we all expected, whether it be due to the Intial Set-up of the System, Software Issues, 'On/Off Power with No Progression or General Cost.................the only thing that has exceeded our expectations is its Speed!
So where do we go from here?
If we were in an ideal world & the Mardave Brushless System was'nt around, I think that the natural progression would be a 27T Rebuildable Stock/13.5T Class, as its only slightly faster than the Standard 'Brushed' G2 Class, making it very equal & extremely Competitive.........but as the Mardave System is here now, I'm not sure if its likely to happen!
I think that we should still have a 2nd Mardave Class like this, maybe call it 'GT CLASS', to save confusion of Brushless or Modified, but we really need to find an equivelent Sensored Motor that has the same Speed as the Mardave Brushless System, when its Set to 100%
Anyone else agree?
The STANDARD CLASS with the 'Brushed' G1/G2 Motor has been going for a long time & has worked fine as it is, so this should really stay as it is. This should be left as the Beginners/Entry Level Class, which is very cheap to do, but still being very Competitive. The Standard Mardave G1/G2 Motor may be a 25T, but its still proven to be quite abit slower than a 27T Rebuildable Stock Motor, so it would be unfair if the 27T Stock was allowed Points in the Standard Class Championship.
When many of the regular more experienced Mardave Racers heard talk of a possible NEW 2nd CLASS for Mardaves, allowing the Commercially available options of a Diff, Carbon Fibre Chassis & Mardave Brushless System, I think that many(including myself) were really keen on the idea, as it would step up their Cars Performance alittle & increase their Skill level more, without having the expence of the higher end Touring Car & 12th Pan Car Classes.
Since then, I think that most of us have come to realise that the Mardave Brushless System is'nt what we all expected, whether it be due to the Intial Set-up of the System, Software Issues, 'On/Off Power with No Progression or General Cost.................the only thing that has exceeded our expectations is its Speed!
So where do we go from here?
If we were in an ideal world & the Mardave Brushless System was'nt around, I think that the natural progression would be a 27T Rebuildable Stock/13.5T Class, as its only slightly faster than the Standard 'Brushed' G2 Class, making it very equal & extremely Competitive.........but as the Mardave System is here now, I'm not sure if its likely to happen!
I think that we should still have a 2nd Mardave Class like this, maybe call it 'GT CLASS', to save confusion of Brushless or Modified, but we really need to find an equivelent Sensored Motor that has the same Speed as the Mardave Brushless System, when its Set to 100%
Anyone else agree?
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: Mardave Classification
Won't 10.5/9.5 be closer to the mardave system? (any body have any to try??) Im temped to get the 9.5 system
Also i agree with dean![Smile :)](./images/smilies/icon_smile.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Also i agree with dean
![Smile :)](./images/smilies/icon_smile.gif)
-
- Getting started
- Posts: 11
- Joined: Tue Sep 09, 2008 1:04 pm
- Name: Ken
Re: Mardave Classification
Rich
You seem to have misunderstood my interest in the 27T stock motor, I am not unhappy and don’t have any issues with regards to 27T stock motors, in fact I want to run a stock motor, I have quite a few of them as you suggest, but didn’t want to run them if I had to go into the modified class, Now it’s been made clear that I can run one in F1 with the G1/G2 motors and still score points I am more than happy![Very Happy :D](./images/smilies/icon_biggrin.gif)
You seem to have misunderstood my interest in the 27T stock motor, I am not unhappy and don’t have any issues with regards to 27T stock motors, in fact I want to run a stock motor, I have quite a few of them as you suggest, but didn’t want to run them if I had to go into the modified class, Now it’s been made clear that I can run one in F1 with the G1/G2 motors and still score points I am more than happy
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- Gazza
- Forum Fisherman
- Posts: 277
- Joined: Sun May 25, 2008 6:21 pm
- Name: GAZZA
- Car: Mardave V12
- Location: Leicester
- Contact:
Re: Mardave Classification
.
Last edited by Gazza on Mon Nov 16, 2009 12:28 am, edited 1 time in total.
- dogpinkscot
- Senior Member
- Posts: 144
- Joined: Sat Jan 03, 2009 7:50 pm
- Name: Justin
- Car: Atomic S2 Mega Dave
Re: Mardave Classification
sorry if i upset you matey it was not intended that way its just a bit of fun on saturday im with rich on this one lets leave all the desision making on motors this season and concentrate on what works the best to satisfy all members needs which may be speed / ease of maintenance/ or cost/ or even reliability personally at this moment in time i think a few more weeks of trying things out will see all this sorted and then let the committee make the rules to suit every ones needs most importantly not alienating new members from racing mardaves
-
- Senior Member
- Posts: 156
- Joined: Mon Feb 12, 2007 6:11 pm
- Name: Richard Wilson
- Location: Bedworth
Re: Mardave Classification
Hi Justin
I think what your suggesting is the most common sence approach
We are already into the chamsionship, the practical choice is to stick to where we are at the moment and complete the champiopnship
class 1 brushed upto 25t
Class 2 brushless upto 13.5t
Then the committee meet and decide based on the outcome of this championship what rules should be applied to the autumn 2009 championship, these can then be cascaded in plenty of time to enable people to prepare their cars.
It would be useful if Roger or Dale could confirm, that I think that practically 4 classes may be difficult to administer and operate, which is another reason why we should stay as we are for the moment, I think their advice on this matter would be useful, afterall they have to make it work.
Richard
I think what your suggesting is the most common sence approach
We are already into the chamsionship, the practical choice is to stick to where we are at the moment and complete the champiopnship
class 1 brushed upto 25t
Class 2 brushless upto 13.5t
Then the committee meet and decide based on the outcome of this championship what rules should be applied to the autumn 2009 championship, these can then be cascaded in plenty of time to enable people to prepare their cars.
It would be useful if Roger or Dale could confirm, that I think that practically 4 classes may be difficult to administer and operate, which is another reason why we should stay as we are for the moment, I think their advice on this matter would be useful, afterall they have to make it work.
Richard
Re: Mardave Classification
Hello Blue,
This will be discussed on Saturday before racing.
My opinion is that there should be a traditional mardave class with the silver motors in and then a modified class, which is what the discussion will be about.
If the Mardave system is rubbish then we need to either agree an alternative or go back to silver motors. Eitherway I expect this to be resolved in 10 mins on Saturday so we can all go back to racing. I feel for all those involved as a club we have collectively agreed to support Mardave and their developments but we have been let down by the equipment. My advice would be to ebay your Mardave system and agree to go back to silver can or 13.5t.
Regards
Dale
Chairman
This will be discussed on Saturday before racing.
My opinion is that there should be a traditional mardave class with the silver motors in and then a modified class, which is what the discussion will be about.
If the Mardave system is rubbish then we need to either agree an alternative or go back to silver motors. Eitherway I expect this to be resolved in 10 mins on Saturday so we can all go back to racing. I feel for all those involved as a club we have collectively agreed to support Mardave and their developments but we have been let down by the equipment. My advice would be to ebay your Mardave system and agree to go back to silver can or 13.5t.
Regards
Dale
Chairman
- dogpinkscot
- Senior Member
- Posts: 144
- Joined: Sat Jan 03, 2009 7:50 pm
- Name: Justin
- Car: Atomic S2 Mega Dave
Re: Mardave Classification
unfair comment dale about mardave system the people who condemned them have not used the new system and some even went out to buy new 13.5 systems now that the mardave system has found to be quite fast its left people with a few sour grapes ie there cars are a lot slower .in hindsight those people should have waited like roger said until chris at mardave was given the chance to rectify the problem if mardave was my business some of the comments on this forum would be used against some members in court to recoupe lost income via bad press
the above comment may sound harsh but mardave is a business not a hobby like it is to us
the above comment may sound harsh but mardave is a business not a hobby like it is to us
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: Mardave Classification
Well the mardave system aint the best for a mardave system because the speedo is like an on off switch i'd personaly go for a 13.5/10.5 system because there smoother to drive as dean has posted not to long ago!
- dogpinkscot
- Senior Member
- Posts: 144
- Joined: Sat Jan 03, 2009 7:50 pm
- Name: Justin
- Car: Atomic S2 Mega Dave
Re: Mardave Classification
hi nicholas have you driven a mardave with there brushless system in
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: Mardave Classification
well no but i ahve seen a few go round hinckley and mostaly every body who drove one around said roughley the same
but this power upgrade has at least cured this loss of power after 4 min's
(also seen it go around an oval (Mr mardave's car) where its better suited as it looked way easyer to drive because it was set at 70%)
but this power upgrade has at least cured this loss of power after 4 min's
(also seen it go around an oval (Mr mardave's car) where its better suited as it looked way easyer to drive because it was set at 70%)
-
- Senior Member
- Posts: 156
- Joined: Mon Feb 12, 2007 6:11 pm
- Name: Richard Wilson
- Location: Bedworth
Re: Mardave Classification
Just for the record, the Mardave Brushless system I raced was fine except for the dumping issue which has now been resolved by Chris. A small lurch when first starting which is normal on sensorless, after that quite smooth.