[POLL ADDED] The mardave championship discussion...
- dogpinkscot
- Senior Member
- Posts: 144
- Joined: Sat Jan 03, 2009 7:50 pm
- Name: Justin
- Car: Atomic S2 Mega Dave
Re: The mardave championship discussion...
sorry but i think a 540 brushed system is to big for a mardave you can hardly fit it in the pod and its very heavy
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: The mardave championship discussion...
no some 540sized just pop in a treat and the heavier they are the better (Traction wise)
- dogpinkscot
- Senior Member
- Posts: 144
- Joined: Sat Jan 03, 2009 7:50 pm
- Name: Justin
- Car: Atomic S2 Mega Dave
Re: The mardave championship discussion...
rubbish there to heavy the last thing you need is more rear end grip
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: The mardave championship discussion...
well i have a car right here with a 540sized motor in and it was not hard to handle when raceing it was just too much power
- WARRENRYAN
- I'm not a brummie I'm a Yam Yam!
- Posts: 172
- Joined: Tue Sep 09, 2008 10:26 pm
- Name: WARRENRYAN
Re: The mardave championship discussion...
The dragon motor weight is 179g and a standard 540 motor is 160g i know coz i have just put them on my weighing scales.
So i would suggest screwing down the rear springs abit more
So i would suggest screwing down the rear springs abit more
- Concept Racing
- Experienced Member
- Posts: 72
- Joined: Fri Oct 19, 2007 4:53 pm
- Name: Eric Wilcock
- Car: XB8TQ, HB C12
- Location: Hinckley, Leicestershire
- Contact:
Re: The mardave championship discussion...
dont forget that I can get the brushless sytems for you as well with no postage costs, just to remind you that there is a shop onsite that can take orders and will deliver.
- WARRENRYAN
- I'm not a brummie I'm a Yam Yam!
- Posts: 172
- Joined: Tue Sep 09, 2008 10:26 pm
- Name: WARRENRYAN
Re: The mardave championship discussion...
Just to everybody know that LRP are the same as nosram! And sorry eric i was not trying to under cut you.
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: The mardave championship discussion...
is that just for the motor? or a combo?Gazza wrote:Right Im going for the LRP 80100 plus 13.5 motor About £80 local shop got one left im off to get it
Sorry Eric been on phone and sorted B4 you posted
- WARRENRYAN
- I'm not a brummie I'm a Yam Yam!
- Posts: 172
- Joined: Tue Sep 09, 2008 10:26 pm
- Name: WARRENRYAN
Re: The mardave championship discussion...
The nosram combo. which is: evil esc and the dragon 13.5 motor is about £80 now. i think?
-
- Average Member
- Posts: 57
- Joined: Sat Aug 30, 2008 8:01 pm
- Name: Richard Ninness
- Car: T2 008, X-6², V12
- Location: Stoke Golding
Re: The mardave championship discussion...
Eric, can you post up a list of ESC's and 13.T motors that you can get that cost around £70 and £40 respectively?Concept Racing wrote:dont forget that I can get the brushless sytems for you as well with no postage costs, just to remind you that there is a shop onsite that can take orders and will deliver.
So the general consesus now is that it's and 13.T motor for under £40 and any ESC under £70 for the brushless class? I can't see how people won't be happy with this? I'll do a poll then Gazza...
I'm interested to see how yours runs on thursday gazza I think it'd be beneficial if you could run it on Saturday so that others can see what it's like?
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: [POLL ADDED] The mardave championship discussion...
i voted other
any brushless motor down to a 13 turn equivlent and less then 40note's
any brushless motor down to a 13 turn equivlent and less then 40note's
-
- Average Member
- Posts: 57
- Joined: Sat Aug 30, 2008 8:01 pm
- Name: Richard Ninness
- Car: T2 008, X-6², V12
- Location: Stoke Golding
Re: [POLL ADDED] The mardave championship discussion...
By 13 do you mean 13.5T? Will see if I can add this to the poll.
Edit - I've added this to the poll, you can change your vote if you like
Edit - I've added this to the poll, you can change your vote if you like
- WARRENRYAN
- I'm not a brummie I'm a Yam Yam!
- Posts: 172
- Joined: Tue Sep 09, 2008 10:26 pm
- Name: WARRENRYAN
Re: [POLL ADDED] The mardave championship discussion...
One of the choice's you have richard is any esc with any 13.5 brushless motor. I think you may have a problem there mate
if you have different drivers with different motors IE; orion, nosram, trinity/ LRP and many more' some are faster then others. more torque and speed. believe me i know. I raced my pan with a nosram 10.5 motor in and it was really slow' then i put a hacker 10.5 motor and you can see the difference in speed. would it be wise to have the same make brushless motor in the car. we have all done it for some time now with a G2 motor just have a different esc in.
if you have different drivers with different motors IE; orion, nosram, trinity/ LRP and many more' some are faster then others. more torque and speed. believe me i know. I raced my pan with a nosram 10.5 motor in and it was really slow' then i put a hacker 10.5 motor and you can see the difference in speed. would it be wise to have the same make brushless motor in the car. we have all done it for some time now with a G2 motor just have a different esc in.