Also gazza the system i have i think its deffo faster then the mardave systemGazza wrote:Yea Nick Bring ya brushless. . .
its about time you poped over to Me pit table . . . . I have a Yellow Box with ALPHA on it
We can run it and see what differance if any to the Mardave Sysyem Or do I take it yours is a 540 size Brushless ?
.
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: UPDATE programming Mardave Brushless . . .THE FIX 22/12/08
-
- Senior Member
- Posts: 156
- Joined: Mon Feb 12, 2007 6:11 pm
- Name: Richard Wilson
- Location: Bedworth
Re: UPDATE Mardave Brushless . . Now with video
Hi Gazza
Interestingly, Chris runs his motor the other way round in the pod to me. Which way round is your motor, is it the same as on the video or 180 degrees round
Richard
Interestingly, Chris runs his motor the other way round in the pod to me. Which way round is your motor, is it the same as on the video or 180 degrees round
Richard
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: UPDATE Mardave Brushless . . Now with video
Mine brushless system is roughley the same layout minus the capacitator and pt
and it will be the sameish when i get the mardave brushless
and it will be the sameish when i get the mardave brushless
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: UPDATE Mardave Brushless . . Now with video
Well thats the way we all run our motors in the oval section hence mine is the sameRichie wrote:Hi Gazza
Interestingly, Chris runs his motor the other way round in the pod to me. Which way round is your motor, is it the same as on the video or 180 degrees round
Richard
- stox217
- Expert Member
- Posts: 342
- Joined: Tue Nov 11, 2008 7:03 pm
- Name: Nick
- Car: V12
- Location: Rugby
Re: UPDATE Mardave Brushless . . Now with video
So whats peoples view's on the brushless system?
-
- Senior Member
- Posts: 156
- Joined: Mon Feb 12, 2007 6:11 pm
- Name: Richard Wilson
- Location: Bedworth
Re: UPDATE Mardave Brushless . . Now with video
Hi All
I have been asked for the source of the LIPO battery I used at yesterdays fun day. Well if you do a search on everyones favourite auction site for "LIPO 7.4v 1:18" there are several to choose from, mine was 1800mah and 25c. Link below
http://cgi.ebay.co.uk/2x-25C-7-4V-1800m ... m153.l1262
I have been asked for the source of the LIPO battery I used at yesterdays fun day. Well if you do a search on everyones favourite auction site for "LIPO 7.4v 1:18" there are several to choose from, mine was 1800mah and 25c. Link below
http://cgi.ebay.co.uk/2x-25C-7-4V-1800m ... m153.l1262