mardave rear pod screws

Swap, share and discuss setups
Locked
User avatar
WARRENRYAN
I'm not a brummie I'm a Yam Yam!
Posts: 172
Joined: Tue Sep 09, 2008 10:26 pm
Name: WARRENRYAN

mardave rear pod screws

Post by WARRENRYAN »

Image Hi guys. I thought i would show you little idea i have done to my mardave :P If any of you use foam or rubber blocks under the rear pod to stop it moving about alot. thought this might help?
not only does it stop all the mess from the wd40 squeezing out the foam or rubber' but it let you control how much movement you want from the pod.
I used a small hot screwdriver and put 2 small holes in the pod and then screwed 2 small screw's in to it :idea:myself and ryan have been driving the car with the screws in at hinckley and you can tell the difference. i have got it set at 3mm at each side if that helps anybody.
Locked